MGB-E-A2-106051 Khóa an toàn Euchner Vietnam
1. Tổng quan về MGB-E-A2-106051
MGB-E-A2-106051 là một hệ thống khóa cửa an toàn của Euchner, được thiết kế để đảm bảo mức độ bảo vệ cao cho các khu vực nguy hiểm trong quy trình sản xuất và tự động hóa. Sản phẩm này thuộc dòng Multifunctional Gate Box (MGB), tích hợp nhiều tính năng an toàn như khóa cơ học, cảm biến an toàn và công tắc điều khiển, giúp kiểm soát hiệu quả việc truy cập vào các khu vực rủi ro.
2. Đặc điểm nổi bật của MGB-E-A2-106051
- Khóa điện từ an toàn: Ngăn chặn việc mở cửa trái phép, đảm bảo an toàn cho người vận hành.
- Tích hợp nút bấm điều khiển: Hỗ trợ các chức năng điều khiển nhanh như khởi động/dừng, reset hoặc khẩn cấp.
- Thiết kế chắc chắn: Vỏ ngoài bền bỉ, chống va đập, phù hợp với môi trường công nghiệp khắc nghiệt.
- Dễ dàng lắp đặt và kết nối: Hỗ trợ giao diện kết nối đơn giản, tương thích với nhiều hệ thống an toàn khác nhau.
- Chứng nhận an toàn: Đạt các tiêu chuẩn an toàn châu Âu như EN ISO 13849-1, EN ISO 14119.
3. Ứng dụng của MGB-E-A2-106051
- Dây chuyền sản xuất tự động
- Ngành công nghiệp thực phẩm và đồ uống
- Ngành dược phẩm
- Lắp ráp ô tô và chế tạo máy
Euchner Vietnam
| Indigo520 A1N3A1AAAN INDIGO520 Transmitter with Display Power Supply and output: 15…35VDC / 24VAC No Module Signal cable lead-through: Cable Gland, Metal M20x1.5/6mm, 5.0 – 9.0mm, 2pcs Cable Gland for One Probe Probe Cable 1m CBL210896-1MSP Mounting: Retrofit Mounting Plate for HMT330, DMT340, PTU300, MMT330 DRW252186SP Standard SW Configuration Multilingual Quick Guide |
| DMPX 6G1C0A0A0B0 Dew Point and Temperature Probe Probe Head and Cable: Dewpoint and Temperature Probe DMP6 DMP6 with 10m cable DrycapS sensor Grid filter for DMP6 Operating Pressure: 1 bar (absolute) Baud rate 19200 Parity, Data Bit, Stop Bit: 8, N, 2 Modbus address 240 Reserved character Probe Mountng Accessory: Cooling set for DMP6 No Connection Cable |
| PTB110 3A0AB PTB110 Wall Mount Barometer, 0…2.5, 0…5 V, or 500…1100 Hz Output Pressure Range 800-1100 hPa 0…5 Vdc Voltage Output Standard Installation Kit Pressure Fitting: Pressure Connector M5, 1/8″ barb |
| HMT330 810B101XCAX100A0ACNBAA1 Premium Humidity and Temperature Transmitter with metal enclosure Báo tham khảo (sắp ngưng sx, hãng k khuyến cáo đặt hàng) |
| Indigo520 A1N3A1AAAN INDIGO520 Transmitter with Display Power Supply and Output • 15…35VDC / 24VAC No Module Metal Cable Glands for 5-9 mm Cables (2 pcs) Cable Gland for One Probe Probe Cable 1m CBL210896-1MSP Retrofit Mounting Plate for HMT330, DMT340, PTU300, MMT330 DRW252186SP SW Configuration: Standard Multilingual Quick Guide Reserved 1: None |
| HMPX 8M2B1A0A000 Humidity and Temperature Probe Probe Head: Humidity and Temperature Probe HMP8 Cable Length: HMP8 with 10m cable Sensor Type: Composite R2 (VHM180C) Filter Type: SST sintered filter Purge and Heating: Purge on, probe heat off Baud rate 19200 Parity, Data Bit, Stop Bit: Communication settings 8, N, 2 Probe Modbus Address: Modbus address 240 Reserved character Probe Mounting Accessory: Mounting flange Connection Cable No connection cable |
| HM70 B0E1A0AB Handheld Humidity and Temperature Meter, ±1 %RH Indicator Type: Rechargeable Indicator with Euro AC Adapter Probe with 5m cable for -70 … +180°C(-94…+356°F),w/Preheat & Purge, HMP77B Calibration Certificate at Room Temperature No Probe Accessories No Connection Cable to a Transmitter No Carrying Case Manual Language: Multilingual Quick Guide for HM70 |
| HMT330 3G0B021BCAC100A0AAABAA1 HMT333 with Remote General Purpose Probe (-40…+80/120 °C) Báo tham khảo (sắp ngưng sx, hãng k khuyến cáo đặt hàng) |
| Indigo520 B2N3A1AAAN INDIGO520 Transmitter without Display Power Supply and Output: Universal AC-Power (100…240 VAC), EUR Cord Metal Cable Glands for 5-9 mm Cables (2 pcs) Cable Gland for One Probe Probe Cable 1m CBL210896-1MSP Retrofit Mounting Plate for HMT330, DMT340, PTU300, MMT330 DRW252186SP SW Configuration: Standard Multilingual Quick Guide Reserved 1: None |
| HMPX 3K2A1A0A000 Humidity and Temperature Probe Probe Head: HMP3 general purpose probe Cable Length: HMP3 general purpose probe Sensor Type: Humicap R2 sensor, no sensor purge Filter Type: Plastic grid & SST net filter DRW010281SP Start-up purge off, interval purge off, probe heat off Parity, Data Bit, Stop Bit: Communication settings 8, N, 2 Probe Modbus Address: Modbus address 240 Reserved character No Probe Mounting Accessory Connection Cable No connection cable |
| Indigo300 A0A1AN1A120N0V1 Indigo300 Transmitter with Display Probe wheel + Cable Gland Metal Additional Lead-through M16: Plug Metal Probe Cable 1m With probe wheel INDIGOCABLE1M Signal Output: 4…20 mA (3.6 mA when in error state) Metric Unit Relative Humidity (0…100 %rh) CH1 Temperature (-40…+60 °C) CH2 No Analog Output CH3 No Mounting Accessories |
| HMP1 Wall-Mounted Humidity and Temperature Probe |
| ASM213582 Probe Holder Assembly Probe holder assembly for HMP1 and HMP9 probes, HMPx, TMPx, DMPx and MMPx probe bodies |
| HMP370EX 41J2GB1CC2NN Intrinsically Safe Humidity and Temperature Transmitter HMT370EX HMP374 Probe for Pressurized Processes IECEx Certificate for HMT370EX and HMP370EX (Global) HMP374: Probe Cable 5 m, max +180 °C Sensor Protection: Sintered Stainless Steel filter, all probes HM47280SP Fitting Body for Probe Mounting, NPT 1/2, HMP374 Transmitter with Display and Keypad, must be protected against direct sunlight to maintain EX-protection! Output Units: Metric Units Ch1: T (-40…+60 °C) Ch2: T (-40…+60 °C) Cable Gland M20x1.5 for Cable 10…14 mm 265208SP No Transmitter Accessories |
| GMP251 A0B0C1N1 CO2 Probe for % Measurements 0…20% Probe with Standard Filter RS-485 Modbus Tem Compensation: Temperature Setpoint +37°C (+99°F) Pressure Compensation: Pressure Setpoint 1013 hPa Background Gas Setpoint 19.7%O2, 93%RH 1.5 m Probe Cable with Open Wires 223263SP No Mounting Accessories Single Package |
| HPP272 AB0D0N Hydrogen Peroxide, Humidity and Temperature Probe Ch1: H2O2 0…2000 ppm Ch2: RS (H2O2 and H2O) 0…100% No Special Features Probe Cables with Open Wires (10m) 254297SP |
| DMT143 G1C1A1A5A2ASX Miniature Dew Point Transmitter Mechanical Connection: ISO G1/2″ Probe with DRYCAP®180D Sensor Digital Interfaces: Digital Output RS-485 Analog Signal Output: …20 mA, 3.6 mA error state Analog Output Scaling: -80…+20 °C Td Alarm LED Setpoint Off, only fault indication Process gas air Pressure Setting for Optimized Accuracy 1 bar Absolute Cable 10.0 m (32.8 ft) with Open Leads HMP50Z1000SP Sensor Protection Standard sintered filter DRW010335SP Accessories ONLY for ISO1/2″ Thread: Sampling cell with 1/4″ male connectors DMT242SC2 Standard package for DMT143 |
| 242659 USB Service Cable M12-5F, RS-485 |
| Repair and Calibration for DMT152 A1DBB10A100A1X Dewpoint and Pressure Transmitter, 1…12 bar, |
| DMT152 A1DBB10A100A1X DMT152 Transmitter for Low Dewpoint with a measurement range of -80 to -20°C Mechanical Connection: ISO 1/2″ Thread Measurement Parameters: Td/f, ppm Analog Output Ch1 & Ch2 + RS-485 as Standard: 4…20 mA Ch1: -80…+20 °C Td/f Ch2: -80…+20 °C Td/f Metric Units/ Pressure Not Specified No ppm Output Sensor Protection: Mesh Filter 18um Stainless Steel Cable for Analog Outputs and Power Supply (Port I): Shielded Cable, 2m, snap in connector No Service Cable Package: Cardboard Box Quick Reference Guide DMT152 |
| PTB110 1B0AA PTB110 Wall Mount Barometer, 0…2.5, 0…5 V, or 500…1100 Hz Output Pressure Range 500-1100 hPa 0…2.5 Vdc Voltage Output Standard Installation Kit Pressure Connector M5, 1/8″ barb Pressure Connector M5, 1/8″ barb |
| HMT330 810B101XCAX100A0ACNBAA1 Premium Humidity and Temperature Transmitter with metal enclosure Báo tham khảo (sắp ngưng sx, hãng k khuyến cáo đặt hàng) |
| HMT330 1A0B001BDAK100A0AAABAA1 Premium Humidity and Temperature Transmitter with metal enclosure Báo tham khảo (sắp ngưng sx, hãng k khuyến cáo đặt hàng) |
| Indigo520 A1N1A1AAAN INDIGO520 Transmitter with NO Display Power Supply and Output • 15…35VDC / 24VAC No Module Metal Cable Gland for 5-9 mm Cable Cable Gland for One Probe Probe Cable 1m CBL210896-1MSP Retrofit Mounting Plate for HMT330, DMT340, PTU300, MMT330 DRW252186SP SW Configuration: Standard Multilingual Quick Guide Reserved 1: None |
| HMP1 Wall-Mounted Humidity and Temperature Probe |
| ASM213582 Probe Holder Assembly Probe holder assembly for HMP1 and HMP9 probes, HMPx, TMPx, DMPx and MMPx probe bodies |
| HMW95D RH + T Wall mount Transmitter, ±1.7 %RH, Modbus, Display |
| HMT310 3B5A1BcK14BBDA1B2 Premium Humidity and Temperature Transmitter with metal enclosure HMT313 for duct mounting or outdoor mounting Non-warmed probe, parameters RH+T+Td+a+Tw+x+h+pws available Standard Mounting Plate Standard power supply, 10…35 VDC 24 VAC Analog Output Signal 4…20mA Ch1: RH 0…100%RH Ch2: T 0…+100 °C (+32…+ 212 °F) Metric Units 8-Pole Connector with 5m Cable 212142 User´s Guide English HMT313 with 2 m Cable, 80 mm probe, max +80 °C HUMICAP180RC Composite Sensor with Chemical Purge Default Sensor Protection in Probe: Plastic Grid & Stainless Steel Netting DRW010281SP Duct Installation Kit for Probe Calibration Certificate At Room Temperature HMT310 3A5A1BcK14BBDA1B2 Lựa chọn A, hiện k còn sx, buộc chọn B cho option này đối với dòng HMT313) |
| HMP110 A15B1C1B0 Humidity and Temperature Probe, ±1.5 %rh Output: 0 … 1 V Ch1: RH (0…100%) Ch2: T -40…+80 °C Sensor Protection: Plastic Grid DRW010522SP Mouting Accessories: Pair of plastic nuts 18350SP Humidity Sensor: Robust general purpose humidity sensor (180R) No Probe Cable Length User Guide: Multilingual Quick Guide HMP60 HMP110 |
| HMP50Z500SP Connection Cable, M8-4F – Open Wires, 5 m |
| DMT143 G1G1A1A3A0ASX Miniature Dew Point Transmitter Mechanical Connection: ISO G1/2″ Probe with DRYCAP®180D Sensor Digital Interface: Digital Output RS-485 Analog Signal Output: 4…20 mA, 0 mA error state Analog Output Scaling: -80…+20 °C Td Alarm LED Setpoint: Off, only fault indication Process gas air Pressure Setting for Optimized Accuracy: 1 bar Absolute Cable 3.0 m (9.8 ft) with Open Leads HMP50Z300SP Standard sintered filter DRW010335SP No Accessories ONLY for ISO1/2″ Thread Standard package for DMT143 Vaisala identity User Guide Language: Multilingual guide |
| HM70 F0D1A0AB Handheld Humidity and Temperature Meter, ±1 %RH |
| Standard Calibration Service for HM70 F0D1A0AB Services for HM70 (MI70-HMP77) Humidity Calibration, 5 Points (RHCALSTD) 15 | 33 | 54 | 75 | 95 Temperature calibration at room temperature (+/-2°C from 23°C) (ROOMTEMP) |
| Standard Calibration Service for HM70 F0D1A0AB Services for HM70 (MI70-HMP77) Humidity Calibration, 5 Points (RHCALSTD) 15 | 33 | 54 | 75 | 95 Temperature calibration at room temperature (+/-2°C from 23°C) (ROOMTEMP) |
| Repair Service for HM70 F0D1A0AB Repair and Calibration for Indicator (Fixed and Repair for Indicator MI70) |
| Repair Service for HM70 F0D1A0AB Repair Service for HMP70 Probe (HMP77) Repair and Calibration for Probe (Repair Service for HMP70 Probe) |
| HMP8 RH+T Probe for Adjustable Depth and Pressure |
| HM70 J0E1A0DB Handheld Humidity and Temperature Meter, ±1 %RH Rechargeable Indicator with JP AC Adapter No Indicator Accessories Probe with 5m cable for -70 … +180°C(-94…+356°F),w/Preheat & Purge, HMP77B Calibration Certificate at Room Temperature No Accessories No Connection Cable to a Transmitter No Cable Weatherproof Carrying Case Multilingual Quick Guide for HM70 |
| HMP60 R00A0A1A0 Humidity and Temperature Probe, ±3 %RH RS-485 Output RS485 Digital Mode: All Parameters RS-485 or Current Interface Plastic Grid with Filter Extra fast response humidity sensor No Converter |
| GMP251 A0B0A0N1 CO2 Probe for % Measurements 0…20% Probe with Standard Filter Output: RS-485 Modbus Temperature Setpoint +37°C (+99°F) Pressure Setpoint 1013 hPa Background Gas Setpoint 0%O2, 0%RH |
| CBL210649SP Flat cable, M8-4(M) – M8-4(F), 1m |
| CBL210493SP Flat Cable, M12-5(M) – M12-5(F), 1m |
| 242659 USB Service Cable M12-5F, RS-485 Used for GMP251 |
| 219690 USB Service Cable M8-4F, RS485 Used for HMP60 |
| HMP60 R00A0A1A0 Humidity and Temperature Probe, ±3 %RH RS-485 Output RS485 Digital Mode: All Parameters RS-485 or Current Interface Plastic Grid with Filter Extra fast response humidity sensor No Converter |
| GMP251 A0B0A0N1 CO2 Probe for % Measurements 0…20% Probe with Standard Filter Output: RS-485 Modbus Temperature Setpoint +37°C (+99°F) Pressure Setpoint 1013 hPa Background Gas Setpoint 0%O2, 0%RH |
| CBL210649SP Flat cable, M8-4(M) – M8-4(F), 1m |
| CBL210493SP Flat Cable, M12-5(M) – M12-5(F), 1m |
| 242659 USB Service Cable M12-5F, RS-485 Used for GMP251 |
| 219690 USB Service Cable M8-4F, RS485 Used for HMP60 |
| HMP370EX 31G1BB1AC5AN Intrinsically Safe Humidity and Temperature Transmitter HMT370EX HMP373 Probe for Confined Spaces IECEx Certificate for HMT370EX and HMP370EX (Global) HMP373: Probe Cable 10 m, max +120 °C Sensor Protection: Plastic grid & SST net filter, All probes DRW010281SP Duct Installation Kit, HMP373/7 210697 Transmitter with Display and Keypad, must be protected against direct sunlight to maintain EX-protection! Output Units: Metric Units Ch1: RH (0…100%) Ch2: T (-40…+60 °C) Cable Lead-through: Cable Gland M20x1.5 for Cable 5…11 mm, 2 pcs Mounting Plate HMT360 Mounting Compatible DRW253246SP |
| HMT370EX 100NB1AC5AN HMT370 Transmitter Unit only ATEX Certificate for HMT370EX and HMP370EX (Europe) Transmitter only, no probe Transmitter only Transmitter with Display and Keypad, must be protected against direct sunlight to maintain EX-protection! Metric Units Ch1: RH (0…100%)/ Ch2: T (-40…+60 °C) Cable Gland M20x1.5 for Cable 5…11 mm, 2 pcs Mounting Plate HMT360 Mounting Compatible DRW253246SP |
| HMP370EX 31G1BN Intrinsically Safe Humidity and Temperature Probe HMP373 Probe for Confined Spaces IECEx Certificate for HMP370EX (Global) HMP373: Probe Cable 10 m, max +120 °C Plastic grid & SST net filter, All probes DRW010281SP Duct Installation Kit, HMP373/7 210697 |
| HMP370EX 11A1NBJAC6AN Intrinsically Safe Humidity and Temperature Transmitter HMT370EX HMP371 Probe for Wall Mounting IECEx Certificate for HMT370EX and HMP370EX (Global) HMP371: Fixed Probe, max 60°C Sensor Protection: Plastic grid & SST net filter, All probes DRW010281SP No Accessories for Probe Transmitter with Display and Keypad, must be protected against direct sunlight to maintain EX-protection! Transmitter without Display and Keypad Output Units: Metric (SI) -units only, for Japanese market (double check) Ch1: RH (0…100%)/ Ch1: T (-40…+60 °C) Cable Lead-through: Cable Gland M20x1.5 for Cable 10…14 mm, 2 pcs Mounting Plate HMT360 Mounting Compatible DRW253246SP |
| HMP370EX 11A1NB1AC6AN Intrinsically Safe Humidity and Temperature Transmitter HMT370EX HMP371 Probe for Wall Mounting IECEx Certificate for HMT370EX and HMP370EX (Global) HMP371: Fixed Probe, max 60°C Sensor Protection: Plastic grid & SST net filter, All probes DRW010281SP No Accessories for Probe Transmitter with Display and Keypad, must be protected against direct sunlight to maintain EX-protection! Transmitter without Display and Keypad Metric Units Ch1: RH (0…100%)/ Ch1: T (-40…+60 °C) Cable Lead-through: Cable Gland M20x1.5 for Cable 10…14 mm, 2 pcs Mounting Plate HMT360 Mounting Compatible DRW253246SP |
| HPP272 AB0N0N Hydrogen Peroxide, Humidity and Temperature Probe Ch1: H2O2 0…2000 ppm Ch2: RS (H2O2 and H2O) 0…100% No Special Features No Cable No Additional Options |
| HPP272 AB0N0N Hydrogen Peroxide, Humidity and Temperature Probe Ch1: H2O2 0…2000 ppm Ch2: RS (H2O2 and H2O) 0…100% No Special Features No Cable No Additional Options |
| Services for HPP272 Product Code: HPP272SERVICES Hydrogen Peroxide Probe Standard Calibration Service (HPP272STDCAL) Calibration Interval (CALIBINTERVAL) |
| HMM100 23A1CL Humidity Module for Environmental Chambers Output Signal: 0…20 mA Probe type: Stainless cable 3 m Measured Parameter: RH Humidity Sensor type: Humicap 180R for general purposes sensor Protection: Sintered PTFE filter 219452SP Chinese User Guide for HMM100 |
Hãy là người đầu tiên nhận xét “MGB-E-A2-106051 Khóa an toàn Euchner Vietnam”
Sản phẩm tương tự
Công tắc an toàn
Công tắc an toàn
Công tắc an toàn
Công tắc an toàn
Súng co nhiệt
Công tắc an toàn
Đánh giá
Chưa có đánh giá nào.